Launch X431 GIII X-PROG 3 programator avansat cheie + imobilizator

X-Prog 3 programator cheie original de la Launch functioneaza cu aparatele: X-431 PRO GT, X-431 PRO V4.0, X-431 PRO 3 V4.0, X-431 PRO 5, X-431 PAD III V2.0, X-431 PAD V, X-431 PAD VII, X431 Diagun V , X431 PRO MINI , X431 PROS MINI, X431 V , X431 PRO3S+, X431 V+ , X-431 PRO GT, X-431 PRO V4.0, X-431 PRO 3 V4.0, X-431 PRO 5, X-431 PAD III V2.0, X-431 PAD V, X-431 PAD VII

X-PROG 3 advanced immobilizer & key programmer is a powerful chip reading device that can read/write keys to the vehicle. Compatible with X-431 series diagnostic scanners, X-PROG 3 enables Anti-theft type identification, Remote control matching, Key chip reading & matching, anti-theft password reading and anti-theft component replacement.

Launch X-PROG 3 Features:

1. Compatible with X-431 series diagnostic scanners, X-PROG 3 enables reading/writing EEPROM, on-bord MCU and BMW CAS4+/FEM chips, Mercedes-Benz infrared keys, generating special keys, reading BMW engine ISN code.
2. Supported brands: VW, AUDI, SKODA, SEAT, BMW, MERCEDES-BENZ, TOYOTA, etc. More models continue to be updated.
3. Supported systems: Automatic Transmission, Instrument System, CAS, Body System, Lock System, etc.
4. Compatible with: X-431 PRO GT, X-431 PRO V4.0, X-431 PRO 3 V4.0, X-431 PRO 5, X-431 PAD III V2.0, X-431 PAD V, X-431 PAD VII
5. Reads & writes most Engine/Gearbox ECUs without disassembling the shell

Advantages:

1. Supports VW/AUDI MQB platform engine ECU replacement or cloning (Read engine ECU data directly from the key).
2. Supports VW/AUDI MQB platform gearbox ECU replacement or cloning.
3. Supports ECU replacement for the fifth-generation of Audi (0AW/0B5) gearbox.
4. Supports reading, writing & cloning the ECU for the fourth-generation of VW UDS engine.
5. Supports BMW E chassis 8HP gearbox ECU reprogramming to empty.
6. Works with reprogramming device to backup/restore programming data (For Bosch/Siemens engine ECU).

Core Functions:

1. Integrated the functions of key matching/copy, anti-theft IC reading & writing, and ECU reading & writing, etc.
2. Supports common ECU/MCU/EEPROM major manufacturers, with over 1200 product models, and constantly updating.
3. Supports ECU replacement for all lost without disassembly for VW/AUDI non-35XX instrument (it can be read directly through independent harness without removing the IC).
4. Supports ECU replacement for the fourth-generation of VW/AUDI engine;
5. Supports ECU replacement for the fifth-generation of VW/AUDI Bosch and Siemens engines.
6. Supports the all lost and replacement for the fourth generation of AUDI EZS, comfortable ECU, and KESSY IC.
7. Supports the BMW F and G chassis 8HP gearbox ECU reprogramming to empty.
8. Supports the BMW CAS4/CAS4+ module replacement.
9. Supports the ECU cloning and replacement for BMW Siemens engines.
10. Erase the password for Mercedes-Benz engine and gearbox within 3S.
11. Add the function of calculating the password for the Mercedes-Benz key within 1 minute.

LAUNCH X431 X prog 3 Compatible with (X-prog 3 can't work alone) :

X431 Diagun V , X431 PRO MINI , X431 PROS MINI, X431 V , X431 PRO3S+, X431 V+ , X-431 PRO GT, X-431 PRO V4.0, X-431 PRO 3 V4.0, X-431 PRO 5, X-431 PAD III V2.0, X-431 PAD V, X-431 PAD VII

Supported Chip Brands:

It supports common mainstream ECU MCU manufacturers, with more than 1,000 product models, and they are continuously being updated.
 

Atmel	NSC
Fujitsu	Philips
Infineon	Renesas M16
MC68HC05	Renesas M32
MC68HC08	Renesas M32R
MC68HC11	Renesas M32C
MC68HC12	Renesas R8C
MediaTek	Renesas V850 SPI
MicroChip	Renesas V850 UART
Nordic	Samsung
ST	SiLabs

Supported EEPROM Brands:

It supports common mainstream EEPROM manufacturers, with nearly 1,000 product models, and they are continuously being updated.
 

Supported EEPROM Brands:

It supports common mainstream EEPROM manufacturers, with nearly 1,000 product models, and they are continuously being updated.
 

 

4Wire	GI	Numonys	SST
Adesto	GigaDevice	OKI	ST
AKM	Grundig	ON Semi	Toshiba
Altera	HOLTEK	Other	Winbond
Amic	Hynix	PCT	Xicor
Atmel	I2C	Philips	xUSSR
BOSCH	ITT	Pioneer	YMC
Catalyst	KHIC	PMC	Spansion
Chings	Macronix	Ramtron	SPI
Dallas/Maxim	MicroChip	Rohm	NEC
EON	Micron	Samsung	NSC
ESMT	MicroWire	Seiko	Ford
EXEL	Mitsubishi	Siemens	Fujitsu
Fairchild	Motorola	Sony

Atmel	NSC
Fujitsu	Philips
Infineon	Renesas M16
MC68HC05	Renesas M32
MC68HC08	Renesas M32R
MC68HC11	Renesas M32C
MC68HC12	Renesas R8C
MediaTek	Renesas V850 SPI
MicroChip	Renesas V850 UART
Nordic	Samsung
ST	SiLabs

Launch X431 X-PROG VS. X-PROG3
 

Item	Launch X431 X-PROG	Launch X431 X-PROG3
Read/Write EEPROM	No	Yes
Read/Write MCU	No	Yes
Mercedes Benz Keys	No	Yes
Key simulator	No	Yes
VW 4th IMMO Dump Mode All Keys Lost	No	Yes
Read engine in Bench mode	No	Yes
VW 4th IMMO enumeration all keys lost	No	Yes
Read gearbox data	No	Yes
Read and write keys	Yes	Yes
Read BMW engine ISN code	No	Yes
Replace OBD reading component	Yes	Yes
Read & Write BMW CAS4+ and FEM chips	No	Yes
Read engine in Boot mode	No	Yes
Read & Write Audi 5th generation steering column chips	No	Yes

Specification:
 

Interface	DB26, DB15
Input Power	DC12V
Working CurrentMax	500mA
Power Consumption	5W
Storage Temperature	-20℃~70℃
Working Temperature	0℃~50℃
Size	228*120 mm

FAQ:

Q1: If the X-PROG 3 can reset the ELV (electric steering column lock) on the Mercedes W169?
A1: Yes, it supported

Q2: Does Xprog3 suport immo program
A2: Yes, it does

Q3: Whether X-431 PRO V7.0 can work with X-Prog 3?
A3: No, it can not, it need work with X431 V 8inch and above X431 Scanner.

Package Including:

- Main unit
- Power adaptor
- Main diagnostic cable
- The fourth-generation data acquisition cable
- The fourth-generation of EEPROM data acquisition cable(without dismantling dashboard)
- BENCH mode cable. MCu converter V1. MCU converter V2
- Mcu cable with multiple leads.EEPROM chip adaptor
- Benz infrared analog acquisition key
- MCU cable with multiple leadsEEPROM converter
- User Manual