Programator Xgecu T48 TL866-3G SPI/Nor Nand Flash/EMMC BGA Tsop SOP PLCC

Description

Universal programmer for EEPROM, Flash (NAND and NOR), eMMC and MCU memories. The device is controlled from a Windows computer using a dedicated application, and communication is via USB 2.0 interface. The programmer is equipped with a ZIF-40 socket and a 16-pin ISP connector, and with the use of additional adapters can program chips in various types of enclosures, including DIP, PLCC, SOP, QFP, TSOP or BGA and various voltage levels from 1.2 V to 6.5 V (VCC) and from 6.5 to 25 V (VPP). The wide range of supported chips (full list of supported devices) makes the XGecu T48 suitable for both professional and hobbyist applications.

Features

Communication interface: USB 2.0

32-bit MCU 120 MHz microcontroller

Supported chip types: serial EEPROM, parallel EEPROM and Flash, FLASH type NOR, NAND, SPI NAND, EMMC, NVRAM, CPLD (more than 30,000 chips)

Suport for circuits in enclosures: DIP, PLCC, SOP, QFP, TSOP or BGA (may require additional adapter)

ZIF-40 socket

16-pin ISP connector

Self-test mode

Pin contact check

Supported voltage levels from 1.2 V to 6.5 V (VCC) and 6.5 to 25 V (VPP) with 64 levels

Power supply: USB

Current consumption up to 500 mA

Reverse polarity, overload, overvoltage protection

Software for Windows 2000, XP, 2003, 2008, Vista, 7, 10

Dimensions: 100 x 65 x 28 mm

Kit contains

XGecu T48 programmer

USB cable