Trusă de reparat filet 131 bucati,M5,M6,M8,M10,M12 - ZIMBER TOOLS
Acest anunţ nu mai este valabil.
Îți recomandăm produse asemănătoare
BGS-931 Set de 3 tarozi metric M4x0.7
BGS-934 Set de 3 tarozi metric M8x1.25
Trusă de reparat filet 131 bucati, ZR-36TRWK01 - ZIMBER TOOLS
COD PRODUS: ZR-36TRWK01
-trusa contine kituri pentru reparat urmatoarele filete:M5,M6,M8,M10,M12.
-inlocuieste un filet rupt la aceeasi dimensiune
-contine 131 bucati.
Product Description.
Manufactured from chrome vanadium steel for strength and durability.
-Ideal for restoring damaged threads in steel, cast, iron and aluminum.
-Suitable for engine repair and other automotive applications.
-Simple and easy to use :-
Drilling - clear the damaged threads with a standard drill. (to repair a spark plug thread no pre-drilling is necessary if using the special spark plug tap), please pay attention that for fluteless taps bigger holes are required.
Check - check that the thread and pitch of the tap and the bolt match
Tapping - use the special taps for cutting the holding thread into the cleared hole (recommended to use a suitable cutting oil)
Install the insert - place insert on installation tool and position the adjustable ring so that the insert tang is centered in the tang slot. Wind the insert in with a light downward pressure until a half turn below the surface. Don't work against the thread direction as the tang could break
Tang removal - After finishing lift the installation tool and use the tang break tool to remove the tang. For bigger sizes and spark plug taps use long nose pliers to remove the tang. Due to the narrow and exact tolerances the new thread normally is stronger than the original ones.
Set includes the following :-
5 x installation tools
5 x break pin tools
5 x twist drills
1 x hex key
5 x taps
110pc wire thread inserts -
M5 x 0.8 x 6.7mm
M6 x 1.0 x 8.0mm
M8 x 1.25 x 10.8mm
M10 x 1.5 x 13.5mm
M12 x 1.75 x 16.3mm
- Livrare și plată
- Curier, cost estimativ livrare: 17 lei
Timp necesar pentru procesarea comenzii: 1 zi.
Metode de plată: Ramburs, Transfer Bancar
Tarife standard pentru expedierea coletelor:
La efectuarea unor cumpărături în valoare de peste 200 euro si pana in 30 kg, costul livrarii este suportat de catre noi. In cazul in care comanda depaseste 30 kg, costul livrarii este suportat de catre client indiferent de valoarea totala a produselor.
Comenzile peste 100Euro si pana in 30 kg beneficiaza de transport gratuit pentru Bucuresti si Ilfov!
Comenzile vor fi trimise spre livrare numai dupa ce se efectueaza confirmarea verbala a comenzii, confirmarea sumei totale si confirmarea valorii rambursului pana la destinatie.
Comenzile se livreaza prin servicii de curierat FanCourier sau NemoExpress.
In general prețul unei livrării este stabilit în funcție de greutatea mărfurilor comandate și zona în care se află localitatea voastră. În funcție de zona localității depinde și termenul de livrare. Aceasta poate varia intre 24h-48h.